DAVIS Anemometer Manuel d'utilisateur

1Standard AnemometerInstallation ManualThe anemometer measures and displays wind-related conditions such as wind speed, wind direction, wind run, wind

Testing the Anemometer2• Stainless Steel Hose Clamps• Small Screwdrivers• Adjustable Wrench• Hand-Held Compass or Local Area MapTesting the Anemometer

Choosing the Best Anemometer Location3Attaching the Wind CupsBefore installing the anemometer, attach the wind cups. Wait until you have installed the

Installing the Anemometer4default, the wind vane reports the correct wind direction if the anemometer arm points true north.To ensure correct orientat

Installing the Anemometer5On a metal pipe with outside diameter greater than 11/4 inch (32 mm):1. Use two stainless steel hose clamps to attach the mo

Maintenance6Installing the wind vane1. Slide the wind vane down onto the shaft as far as it will go. (Because of the shape of the shaft, the vane will

Troubleshooting7TroubleshootingWhile your anemometer is designed to provide years of trouble-free operation, occasionally problems may arise. If you a

Standard Anemometer Installation ManualProduct Number: 7911Document Part Number: 7395.032 Rev E (February 8, 2013)© Davis Instruments Corp. 2013. All