DAVIS Vantage Pro ISS Retrofit Kit Manuel d'installation télécharger pdf (Page 4)

Page 4 Vantage Pro® ISS Retrofit Kit

7. Hammer the three (3) long radiation shield screws down into the base. The

screws should move fairly easily with light taps from a hammer.

8. Remove the rain collector cone.

9. Pull the top closed radiation shield plate off or use pliers to hold the push-

nuts while you unscrew the screws, then discard the old screws, push-nuts

and washers.

10. Save the top closed radiation shield plate for later use.

Pound the 3

long screws

down into the

base.

Twist off the rain collector cone.

Top closed

radiation

shield

plate

Remove push nuts

from the 3 long screws,

then remove the screws.

ISS2 RetroKit D011.fm Page 4 Wednesday, February 19, 2003 6:02 PM

1 2 3 4 5 6 7 8

Pas de commentaire

DAVIS Vantage Pro ISS Retrofit Kit Manuel d'installation Page 4