DAVIS Anemometer Manuel d'utilisateur télécharger pdf (Page 5)

Installing the Anemometer

On a metal pipe with outside diameter greater than 11/4 inch (32 mm):

1. Use two stainless steel hose clamps to attach the

unting base to masts or pipes larger than 1 1/4"

diameter, large enough to fit around the mast or pipe

and the anemometer base.

Attaching base to a pipe

using hose clamps

2. Hold the anemometer base against the pipe and

fasten the hose clamps over the anemometer base

and around the metal mast or pipe.

Attaching Arm to Base

1. Insert the anemometer arm into the

anemome

ter base.

Inserting arm into base

Guide the anemometer cable through

the slot as you insert the arm.

2. Insert the pan head screw into one of

the ho

les in the base and slide it

through the arm.

3. Secure the pan head screw using

the flat washer

, lock washer, and

hex nut as shown.

Attaching the anemometer arm to the base



1 2 3 4 5 6 7 8

Pas de commentaire

DAVIS Anemometer Manuel d'utilisateur Page 5