DAVIS Wireless Repeater 7625 Manuel d'installation télécharger pdf (Page 13)

Mounting the Station Page 13

6. Tighten four set of the washers and hex nuts until the mounting bracket is firmly

mounted on the pole.

7. Hold the SIM housing against the pole near the station. Put two U-bolts around the

pole and insert the ends through the holes in the back of the mounting bracket.

8. Secure the SIM housing using 1/4" flat washers and 1/4" hex nuts.

1/4" Flat Washers

1-1/2" U-Bolts

1/4" Hex Nuts

Mounting the Radiation Shield on a Pole

U-Bolts

Temp/Hum

and

Solar Power

Cables

1/4" Flat Washers

1/4" Lock Washers

1/4" Hex Nuts

Mounting the SIM Housing on a Pole

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

DAVIS Wireless Repeater 7625 Manuel d'installation Page 13