DAVIS Wireless Repeater 7625 Manuel d'installation télécharger pdf (Page 3)

Preparing the Solar Radiation Shield Page 3

Preparing the Solar Radiation Shield

Disassembling the Station

Open up the station by removing the mounting bracket as shown in the following illus-

tration.

1. Remove the three (3) screws connecting the mounting bracket to the radiation

shield.

2. Lift the mounting bracket off of the radiation shield.

3. Remove the top two (2) radiation shield plates to expose the fan plate and junction

board.

2" Screws (3)

Lock Washers

Flat Washers

Closed Plate

(no hole in center)

Open Plate

(hole in center)

Solar Power

Cable

Sensor

Cable

Fan Plate

Battery Compartment

Mounting Bracket

Junction Board

Direction

of air flow

Removing the Mounting Bracket

1 2 3 4 5 6 7 8 ... 19 20

Pas de commentaire

DAVIS Wireless Repeater 7625 Manuel d'installation Page 3