Davis Alarm Output Module Manuel d'utilisateur télécharger pdf (Page 14)

Page 14 Alarm Output Module

Mounting the AOM

You may mount the AOM against a wall or other vertical surface or you may

simply set it down on a horizontal surface

Note: Consult the appropriate shelter manual if installing the AOM in either the Complete System

Shelter or the Multi-Purpose Shelter.

✦

To mount the AOM against a wall or other vertical surface, attach the base to the

mounting surface using the #6 x 1” screws.

Use two screws (as pictured below) when attaching to a stud. Use three

screws (as pictured below) in any other case. Tighten the screws until the

base is securely fastened to the mounting surface. Do not overtighten.

ATTACHING THE BASE TO THE MOUNTING SURFACE

✦ If you plan to place the AOM on a horizontal surface, attach one of the adhesive

pads to each of the four raised circles on the underside of the base.

ATTACHING ADHESIVE PADS

1 2 ... 9 10 11 12 13 14 15 16

Pas de commentaire

Davis Alarm Output Module Manuel d'utilisateur Page 14