DAVIS 8126GD Guide de l'utilisateur télécharger pdf (Page 20)

Settings Screens

• Move to the next Settings Screen — Press and release MODE.

• View the Data Screens — Press and hold MODE.

Security Code Screen

If you are concerned about unauthorized changing of DriveRight 600E

settings, enter a security code set either in the DriveRight 600

E itself or in

DriveRight FMS. After entering the security code, the DriveRight 600

does not allow access to the rest of the Settings Screens until the correct 4-

digit security code is entered. Five attempts are allowed to enter the correct

security code before returning to the Current Readings Screen and

activating the tamper indicator (pressing MODE to move to the next

Settings Screen is considered an “attempt”). The time and date of the

unsuccessful tamper attempt are stored and may be viewed using FMS.

Note: Use security code 0000 (four zeros) to keep the settings and calibration from being

password-protected, since the DriveRight 600

E defaults to that code when first

displaying the Security Code Screen.

Security Code Screen

The following options are available from the Security Code Screen:

• Enter the Security Code — The flashing digit in the code is the

active digit. Press and release PLUS or MINUS to cycle forward or

backward through the available entries for the active digit (0 to 9).

To change the active digit, press and release SET/CLEAR. Each

time SET/CLEAR is pressed, the next digit becomes active. Once

the correct security code has been entered, press MODE to move to

the next Setting Screen.

Note: If the entered code is correct, the Clear Log Screen displays. If the entered code is

not correct, the word NO displays. The correct code may be attempted five times

before the DriveRight 600

E returns to the Current Readings Screen and activates the

tamper indicator, if the tamper indicator is enabled. See the FMS Online Help for

more information.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Pas de commentaire

DAVIS 8126GD Guide de l'utilisateur Page 20