DAVIS 8126GD Guide de l'utilisateur télécharger pdf (Page 21)

Settings Screens

• Set or Change the Security Code — Use PLUS and MINUS to

enter the current correct code, if entering the security code for the

first time, make sure 0000 is entered. Press and hold SET/

CLEAR until “CHG” (change) displays.

Change Security Code

Use PLUS and MINUS to enter the new desired security code and

make a note of the new security code. When finished, press MODE

to save the new code and move to the Clear Log Screen.

Clear Log Screen

The Clear Log Screen may be used to perform a “total clear” function

which erases all data for every trip in your log at once.

Note: All the stored trips for every driver are cleared using this screen.

Clear Log Screen

Note: Accident and tamper log data cannot be cleared using this screen.

The following option is available in the Clear Log Screen:

• Clear all Log Data — Press and hold SET/CLEAR. The word

“CLR” (clear) appears in the display to indicate that the DriveRight

600

E is preparing to clear all log data. To protect against accidental

clearing of data, press and hold SET/CLEAR for 3 seconds to clear

the data.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

DAVIS 8126GD Guide de l'utilisateur Page 21